Abstract:
Extracting energy from sun light is one of the most promising ways to solve today’s
energy crisis. Direct conversion of sun energy to electrical energy using
nanostructured organic/inorganic hybrid structures has attracted much attention for
many years. In particular, plasmonics researchers are turning their attention to
incorporation of metal nanoparticles (NPs) into the active layer of polymer solar cells
(PSCs), where design approaches based localized plasmonic resonance effect
(LSPR) can be used to enhance the optical absorption in photovoltaic devices,
enabling a considerable reduction in the physical thickness of solar photovoltaic
absorber layers. The localized surface plasmon resonance (LSPR) occurs in
illuminated metallic nanoparticles, like gold nanoparticles (Au-NPs), when
oscillations of the incident electric field resonate with the surface electronic charges
on those nanoparticles. The strong LSPR near field mainly distributes laterally along
the active layer, therefore, the metallic NPs can experimentally and theoretically
enhance the light absorption in the active layer of PSCs. In this study, to enhance the
power conversion efficiency (PCE) of the polymer solar cells (PSCs), Gold (Au)
nanoparticles are incorporated into P3HT/PCBM active layers. Addition of Au NPs
increased the power conversion efficiency by up to 43.9% compared to a reference
cell without Au-NPs. The short circuit current(Jsc) of the cells containing 0.05 mg of
Au NPs was measured at 7.509 mA/cm2 compared to 5.558 mA/cm2 in the reference
cells without nanoparticles; meanwhile, the external quantum efficiency(EQE)
increased from 61% to 65.5%, showing an enhancement of 7.37%. Au-NPs improved
the charge collection at the anode, which results in higher short circuit current and
fill factor.
