Digital Repository
Characterisation of CuInS2 thin film prepared by electrodeposition and sulphurisation with photoluminescence spectroscopy
- UoK Repository Home
- →
- Science
- →
- Physics
- →
- View Item
JavaScript is disabled for your browser. Some features of this site may not work without it.
| dc.contributor.author | Garuthara, R. | |
| dc.contributor.author | Wijesundera, R.P. | |
| dc.contributor.author | Siripala, W. | |
| dc.date.accessioned | 2015-01-19T06:45:58Z | |
| dc.date.available | 2015-01-19T06:45:58Z | |
| dc.date.issued | 2003 | |
| dc.identifier | Physics | en_US |
| dc.identifier.citation | R Garuthara, RP Wijesundera, and W Siripala, 2003, Characterisation of CuInS2 thin film prepared by electrodeposition and sulphurisation with photoluminescence spectroscopy, Solar Energy Materials and Solar Cells 79, pp 331-338 | en_US |
| dc.identifier.issn | Physics | |
| dc.identifier.uri | ||
| dc.identifier.uri | http://repository.kln.ac.lk/handle/123456789/5106 | |
| dc.description.abstract | Potentiostatic electrodeposition and sulfurization techniques were used to prepare polycrystalline CuInS2 thin films. X-ray diffraction and photoresponse measurements in a photoelectrochemical cell (PEC) revealed that photoactive polycrystalline CuInS2 films can be deposited on Ti substrate. Photoluminescence (PL) spectroscopy was used to investigate the prepared thin films and optically characterize them. PL spectra revealed the defect structure of the samples with an acceptor energy level at 109 meV above the valance band and a donor energy level at 71 meV below the conduction band. The CuInS2 thin films prepared in this investigation are observed to be In-rich material with n-type electrical conductivity. | en_US |
| dc.language.iso | English | en_US |
| dc.publisher | Solar Energy Materials and Solar Cells | en_US |
| dc.title | Characterisation of CuInS2 thin film prepared by electrodeposition and sulphurisation with photoluminescence spectroscopy | en_US |
| dc.type | Article | en_US |
